Living Spaces Hall Tree: 3 Corner Picks

As an Amazon Associate I earn from qualifying purchases. Links marked “Affiliate link” may earn us a commission at no extra cost to you. Learn more.

The slim metal corner coat rack measures 15.75 by 15.75 inches and 70.87 inches tall, with 3 hooks. The corner hall tree with bench is the largest, needing 33.07 inches of wall on each side, and it weighs 42.3 pounds with 10 double hooks and a seat for shoes. The adjustable-shelf rack is 12.2 inches deep and has 10 movable hooks. All three stand 70.87 inches tall, so check the wall run on both sides of the corner before buying. We have not tested these racks, so confirm the dimensions and hook counts on each listing.

Quick compare: the products in this guide

Sizes come from the Amazon listings as we read them; check the product page for the current details before you buy.

Why a living spaces hall tree matters in a small space

An entryway in a small apartment usually has no closet and no spare wall. Coats end up on chair backs, shoes pile up by the door and bags land on the floor. A living spaces hall tree fixes all three problems on one footprint. Because corner hall trees point into the room’s least-used zone — the inside corner where two walls meet — they use floor area that would otherwise sit empty. A freestanding unit also means no drilling, which matters for renters who cannot anchor furniture to the wall.

The vertical design matters too. All three picks here stand 70.87 in tall, so storage stacks upward instead of spreading outward. That height is still well under a standard ceiling, so you keep open sightlines above the unit.

One safety note: tall, narrow furniture can tip if overloaded on one side or climbed on. The CPSC recommends anchoring furniture to the wall where possible; the federal tip-over standard covers clothing storage units specifically, but anchoring is a sensible habit for any tall piece. Follow the manufacturer instructions that ship with each unit.

Key measurements and how to measure your corner

A corner hall tree needs measurements on two walls, not one. Here is what to check:

• Wall run on each side of the corner. Measure from the corner outward along each wall. The 33.07 in wide pick needs about 33 in of clear wall on both sides of the corner — that is the largest demand of the three.
• Depth into the room. The two slimmer picks project 12.2 in and 15.75 in along each wall, so they leave most of the floor free.
• Height. All three are 70.87 in tall. Check for light switches, thermostats, art or shelving between floor and that height on both walls.
• Walkway. As a yardstick, the US Access Board calls for 36 in of clear width on an accessible route, with 32 in allowed for short stretches like doorways. Your home is not bound by that, but if your hall tree leaves less than 36 in of passage in front of it, the entry will feel pinched.
• Door swing. A door swings through an arc equal to its width — a 30 in door sweeps a 30 in arc, not the 1.5 in thickness of the slab. Make sure the hall tree sits outside that arc.
• Weight. The bench-style pick weighs 42.3 lb, which matters if you plan to move it often or carry it upstairs. The listings for the other two do not state a weight, so check the listing.

The three picks at a glance

Corner rack with 10 movable hooks and adjustable shelves. This unit is 12.2 in deep and designed for a right-angle corner. It carries 10 movable hooks plus shelves you can raise or lower — the listing notes you can move a shelf up to make room for tall boots. Assembly is required. It is the most flexible of the three for changing storage, since both hooks and shelves reposition.

Corner hall tree with bench, shoe rack and display shelves. The largest pick at 33.07 x 33.07 x 70.87 in and 42.3 lb, this industrial-style unit in a greige finish wraps the corner with four coat-rack panels, 10 double hooks, open display shelves, a bench and shoe storage. The listing describes it as deformable — it can reconfigure between corner and flat arrangements — which helps if you move to a place without a usable corner. It is the only pick with a seat for putting shoes on.

Slim metal corner coat rack with basket. At 15.75 x 15.75 x 70.87 in, this hand-welded metal rack with a powder-coated finish is the smallest footprint. It has 3 hooks, one shelf and a storage basket at the bottom. Three hooks suits one or two people rather than a family’s worth of coats, but for a studio or a bedroom corner it is the least intrusive option.

Worked example: fitting the largest pick in a 6 ft entry

Wall A runs 6 ft (72 in) from the corner to the door casing, and Wall B runs 72 in from the corner to where the hallway opens into the room. The passage through the nook is 60 in wide.

Step 1 — check the 33.07 in corner unit against each wall. Along Wall A: 72 in minus 33.07 in equals 38.93 in of wall left beyond the unit. Along Wall B: 72 in minus 33.07 in equals 38.93 in left. The unit fits with room to spare on both walls.

Step 2 — check the door swing. The entry door is 30 in wide and hinged on Wall A, so it sweeps a 30 in arc from the corner. The unit occupies 33.07 in along Wall A from the corner — wait, the door is on the adjacent wall, swinging into the nook. The arc covers the first 30 in of Wall B’s floor zone. The unit starts at the corner on Wall B, so the first 30 in of its 33.07 in run sits inside the swing. That is a conflict: move the unit’s center toward the far end or mount it so its shallow side faces the door. Simpler fix in this nook — place the slim 15.75 in rack on Wall B instead: 30 in of door arc minus 15.75 in of rack run still overlaps, so instead hang the door to swing against Wall A and keep Wall B’s corner free.

Step 3 — check the walkway. The passage is 60 in wide. The unit projects about 33 in along the walls, but a corner unit’s deepest point into the room is along the diagonal. Treat the unit as roughly a 33 in square zone at the corner: 60 in of passage minus 33 in of unit zone equals 27 in of clear path — under the 36 in yardstick. The slim rack instead: 60 in minus 15.75 in equals 44.25 in of clear path, which clears the yardstick comfortably.

Who should buy a corner hall tree

Buy one if your entry has an open inside corner and no coat closet. Renters benefit most — these are freestanding, need no wall mounting to stand, and move with you. Households that want shoe storage, a seat and coat hanging in one piece should look at the bench-style unit, provided the corner can spare 33 in on each wall. Singles or couples in studios will get more value from the slim 15.75 in metal rack, which handles daily coats and a bag without crowding the room. If your storage changes seasonally — tall boots in winter, light jackets in summer — the adjustable-shelf rack with movable hooks adapts without tools beyond the initial assembly.

Who should skip it

Skip a corner hall tree if your entry has no free inside corner — a flat wall-mounted rack or hooks will serve better; our roundup of best narrow console tables for small entryways covers wall-hugging alternatives. Skip the large bench unit if your passage is under about 5 ft wide, since the walkway math gets tight. Skip all three if you need enclosed storage — these are open designs, so coats and shoes stay visible. For concealed storage, a cabinet may suit better; see best storage cabinets for home office for closed options that also work in living spaces. And if more than three people need daily coat hooks, the 3-hook slim rack alone will not be enough — the two 10-hook units are the better fit.

Common mistakes

• Measuring one wall only. A corner unit needs clearance on both walls; measure each run from the corner.
• Forgetting the door swing. The arc equals the door width, not its thickness. A 30 in door claims a 30 in arc of floor.
• Counting the corner twice. The unit sits in the corner once — do not subtract its depth from both walls as if it were two pieces.
• Ignoring walkway width. Keep the 36 in yardstick in front of the unit, or the entry bottlenecks every time someone walks in.
• Overloading one side. Hang heavier coats spread across hooks rather than all on one side, and anchor tall units to the wall when the maker allows it.
• Skipping height checks. At 70.87 in, these units can collide with thermostats, switches and shelves mounted between floor and ceiling.

Frequently asked questions

How much floor space does a corner hall tree take?

The slimmest pick here occupies a 15.75 in square zone at the corner, the adjustable-shelf rack runs 12.2 in along each wall, and the largest bench unit needs 33.07 in of wall run on each side of the corner.

How tall are these hall trees?

All three measure 70.87 in tall, which fits under standard ceilings with room to spare and keeps the top below most wall-mounted items above that height.

Do I need to anchor a hall tree to the wall?

These are freestanding, but the CPSC recommends anchoring tall furniture where possible. Follow the manufacturer instructions, keep heavier items low, and do not let children climb the shelves.

Can a hall tree fit in a bedroom instead of an entryway?

Yes — the slim metal rack at 15.75 in square works in a bedroom corner as a clothes and bag stand, and the bench unit’s shelves display decor as easily as they store shoes.

How many coats can these hold?

Two of the picks carry 10 hooks — one lists 10 double hooks — while the slim metal rack has 3 hooks plus a basket. For more than two people’s daily coats, choose one of the 10-hook units.

Products worth checking

We have not tested these products. Sizes and features come from the Amazon listings as we read them; where a listing does not say, we say so.

Sources checked

• US Access Board — Accessible Routes
• CPSC Anchor It

Specifications come from the Amazon listings as we read them for this guide. Product details and availability can change, so confirm on the product page before you buy.

How we research our guides