As an Amazon Associate I earn from qualifying purchases. Links marked “Affiliate link” may earn us a commission at no extra cost to you. Learn more.

The Homode Floating Nightstand is the smallest of the three wall mounted nightstands, at 1.07 square feet (9.6 inches deep by 16 inches wide), with a cable hole. The Nathan James Jackson Wall Mounted Floating nightstand has the largest listed footprint, at 1.44 square feet, but it is the only one with a drawer and an open cubby. The WDSHIYI sits in the middle at 1.15 square feet. The Homode lists 30 pounds, the Nathan James lists 33 lbs on the tabletop and 11 lbs in the drawer, and the WDSHIYI lists no limit. Specifications come from Amazon listing data checked October 3, 2026, and we have not tested these products. Confirm the mounting hardware on the product page.

Quick compare: the products in this guide

Sizes come from the Amazon listings as we read them; check the product page for the current details before you buy.

ProductListed detailsLink
Homode Floating Nightstand, 2 Tier Wall Mounted Nightstand with Cable Hole9.6″D x 16″W x 7.8″H; 9.6″D x 16″W x 7.8″HSee details on Amazon Affiliate link
Floating Nightstand Wall Mounted Bedside Shelf Handmade Bedroom…17.5″D x 9.5″W x 8″H; 17.5″D x 9.5″W x 8″HSee details on Amazon Affiliate link
Nathan James Jackson Wall Mounted Floating Bedroom Nightstand with Storage…13″D x 16″W x 9″H; 13″D x 16″W x 9″HSee details on Amazon Affiliate link

Three options at a glance

PickListed dimensionsFloor footprintFootprint rank
Homode Floating Nightstand9.6″ D × 16″ W × 7.8″ H153.6 sq in (1.07 sq ft)Smallest
Floating Nightstand Wall Mounted Bedside Shelf17.5″ D × 9.5″ W × 8″ H166.25 sq in (1.15 sq ft)Middle
Nathan James Jackson Wall Mounted Floating13″ D × 16″ W × 9″ H208 sq in (1.44 sq ft)Largest

1. Homode Floating Nightstand, 2 Tier Wall Mounted Nightstand with Cable Hole — Smallest listed footprint

Listed details: dimensions 9.6″ D × 16″ W × 7.8″ H; item weight 4.3 pounds; listed maximum weight 30 pounds; material Metal, Wood; frame Metal; color Black.

The Homode is a small black floating shelf sold as a 2-tier wall mounted nightstand. The spec table lists 9.6″ D × 16″ W × 7.8″ H, 4.3 pounds and a 30-pound maximum recommendation, with a metal frame and a wood top. The footprint works out to 1.07 sq ft (9.6 × 16 ÷ 144). The bullets mention a geometric X-shaped side, a cable hole for charging cords and lamps, and a floating design that leaves the floor clear for cleaning. They also pitch it for the bathroom and kitchen, so it is a general-purpose shelf. The listing says installation needs no complex tools but does not describe the hardware or wall types.

Pros

  • A cable hole is listed for phone, tablet or lamp cords
  • The smallest listed footprint of the two comparable ones, 1.07 sq ft against 1.44 for the Nathan James
  • A 30-pound maximum recommendation and a metal frame are both stated

Cons

  • Only 7.8 inches tall, so there is little room for tall items, and “2 tier” is not explained in the bullets shown
  • The bullets describe bathroom and kitchen uses, so it is not designed as a bedside piece first
  • The listing says no complex tools are needed, but it does not say what anchors are included or which walls it suits

Who it is for / who should skip it: Pick it if you want a minimal, shallow shelf for a phone and lamp with a cable hole. Skip it if you want a drawer or closed storage.

2. Floating Nightstand Wall Mounted Bedside Shelf Handmade Bedroom Furniture,Pine Wood Floating Bedside Table, Minimalist and Unique Style 17.5”x 9.5”x 8” Brown — Middle listed footprint

Listed details: dimensions 17.5″ D × 9.5″ W × 8″ H; item weight 16 ounces; material Wood; frame Beech Wood; color Brown.

The WDSHIYI is a brown pine and beech wood floating bedside shelf, listed at 17.5″ D × 9.5″ W × 8″ H and 16 ounces. The spec table puts 17.5 inches as depth, while the bullets and title give the size as W 17.5 × D 9.5 × H 8, so which side goes against the wall is unclear. Another spec line gives 17.5″ × 17.5″ × 8″. The bullets describe an open shelf with a back baffle that leaves a wall socket clear, and “four legs made from solid beech wood… in a splayed shape,” which is odd for a wall-attached piece. Assembly is listed at about 10 minutes.

Pros

  • An open shelf with a back baffle is described to keep items from falling and to leave a wall socket unblocked
  • The listing says all accessories and instructions are included and assembly takes about 10 minutes
  • At 16 ounces it is the lightest of the three, so it should stress the wall least

Cons

  • The depth and width are swapped between the spec table (17.5 D × 9.5 W) and the bullets (17.5 W × 9.5 D), so footprint is not comparable here
  • The bullets mention four beech legs, which does not fit a wall-mounted piece; check the photos to see if it also stands on the floor
  • No weight limit is listed, and the material is MDF boards in one bullet and wood in the spec table

Who it is for / who should skip it: Pick it if you want a simple open wooden shelf and have confirmed on the current listing how it mounts and which way it faces. Skip it if you want a stated weight limit.

3. Nathan James Jackson Wall Mounted Floating Bedroom Nightstand with Storage Drawer and Modern Open Shelf Cubby, Light Oak Wood — Largest listed footprint

Listed details: dimensions 13″ D × 16″ W × 9″ H; item weight 12 pounds; listed maximum weight 33 pounds; material Engineered Wood, Paper Laminate; frame Engineered Wood; color Light Oak.

The Nathan James Jackson is the most fully equipped of the three, with a drawer and an open cubby in a light oak finish. The spec table lists 13″ D × 16″ W × 9″ H, which is 1.44 sq ft (13 × 16 ÷ 144), and 12 pounds. The bullets give a 33 lb limit on the tabletop and 11 lb in the drawer, a cord hole for cables, and wall-anchored bolts for drywall. The listing mentions a 70-minute assembly and a lifetime manufacturer warranty, with a 100-day trial. The materials are engineered wood and paper laminate. The spec table lists 2 drawers, while the bullets describe one drawer and an open cubby.

Pros

  • Load limits are split clearly: 33 lbs on the top and 11 lbs in the drawer
  • A closed drawer plus an open cubby gives hidden and visible storage
  • The listing includes wall-anchored bolts for drywall and mentions a lifetime manufacturer warranty

Cons

  • Largest comparable footprint at 1.44 sq ft, 0.37 more than the Homode (1.44 − 1.07)
  • The spec table lists 2 drawers but the bullets describe one drawer and one cubby, so check the photos
  • A 70-minute assembly is the longest time listed (the WDSHIYI says 10 minutes), and at 12 pounds it is heavier than the Homode’s 4.3 before anything is placed on it

Who it is for / who should skip it: Pick it if you want a drawer for chargers and a stated load split on a drywall bedroom wall. Skip it if you want the smallest shelf or a quick install.

What to check before buying wall mounted nightstand

1. How it attaches and what the wall is. A wall mounted nightstand hangs off the wall, so the mounting hardware and the wall decide everything. The Nathan James says wall-anchored bolts are provided for drywall. The Homode says no complex tools are needed but does not name the hardware. The WDSHIYI says accessories and instructions are included. If you have plaster, brick or tile, the listings do not tell you what works.

2. Load rating. The Homode lists 30 pounds as a maximum. The Nathan James lists 33 lbs on the top and 11 lbs in the drawer. The WDSHIYI lists no limit. A bedside piece holds a lamp, a phone and a book, but also water and sometimes a laptop. Add up your items. Keep in mind that the rating is a ceiling, not a target.

3. Depth and what it does to the bedside. The Homode is 9.6 inches deep and the Nathan James 13 inches. The WDSHIYI lists 17.5 or 9.5 inches depending on whether you trust the spec table or the bullets. A deeper shelf holds a lamp base better but sticks into the room.

4. Height from the mattress. These are 7.8, 8 and 9 inches tall, so the position of the wall bracket matters more than the shelf’s own height. Measure from your mattress top and decide the mounting height before you drill.

5. Storage type. The Homode is an open shelf with a cable hole. The WDSHIYI is an open shelf with a back baffle. The Nathan James has a drawer and a cubby. Closed storage hides chargers and glasses.

6. Listing conflicts. The WDSHIYI lists depth and width in swapped order and mentions legs. The Nathan James spec table shows 2 drawers while the bullets describe one. Open the photos and check.

Worked example: fit math for these three options

This worked example is our own planning arithmetic from the listed dimensions, not test results. The wall length and walkway width are assumed example values; replace them with your measurements.

Wall example. Assume 36 inches of clear wall.

  • Homode Floating Nightstand: 36 − 16 = 20 inches spare; centred, 10 inches on each side before trim, plugs or curtains.
  • Floating Nightstand Wall Mounted Bedside Shelf: 36 − 9.5 = 26.5 inches spare; centred, 13.25 inches on each side before trim, plugs or curtains.
  • Nathan James Jackson Wall Mounted Floating: 36 − 16 = 20 inches spare; centred, 10 inches on each side before trim, plugs or curtains.

Walkway example. The US Access Board gives 36 inches as the minimum clear width for an accessible route. That figure is a yardstick, not a rule for private homes. To keep 36 inches clear beside each product, the walkway between it and the opposite obstacle must be at least 36 inches plus its depth:

  • Homode Floating Nightstand: 36 + 9.6 = 45.6 inches of total path width.
  • Floating Nightstand Wall Mounted Bedside Shelf: 36 + 17.5 = 53.5 inches of total path width.
  • Nathan James Jackson Wall Mounted Floating: 36 + 13 = 49 inches of total path width.

Footprint. Depth × width, converted at 144 square inches per square foot:

  • Homode Floating Nightstand: 9.6 × 16 = 153.6 sq in, or 1.07 sq ft.
  • Floating Nightstand Wall Mounted Bedside Shelf: 17.5 × 9.5 = 166.25 sq in, or 1.15 sq ft.
  • Nathan James Jackson Wall Mounted Floating: 13 × 16 = 208 sq in, or 1.44 sq ft.

Mistakes to avoid

  • Mounting into drywall without anchors. The Nathan James includes wall-anchored bolts for drywall. For the others, the listings do not say, so buy suitable anchors.
  • Reading the weight limit as the load for everything. The Nathan James is 33 lbs on the top but only 11 lbs in the drawer.
  • Trusting the WDSHIYI dimensions. The spec table and bullets swap depth and width. Check which edge goes on the wall.
  • Choosing mounting height by guess. These shelves are only 7.8 to 9 inches tall, so decide the height from your mattress before drilling.

Frequently asked questions

How much weight can a wall mounted nightstand hold?

The Homode lists a 30-pound maximum recommendation. The Nathan James lists 33 lbs on the tabletop and 11 lbs in the drawer. The WDSHIYI listing states no limit. Always confirm on the current listing and fit anchors suited to your wall.

Can I use a wall mounted nightstand with cords and lamps?

The Homode and Nathan James both list a cable or cord hole. The WDSHIYI describes a back baffle that leaves a wall socket unblocked. Check how far your outlet is from where you will mount the shelf. Check the current listing for where the outlet and cable hole sit.

Do wall mounted nightstands have drawers?

The Nathan James Jackson has a closed front drawer and an open cubby, though the spec table says 2 drawers. The Homode and WDSHIYI are open shelves. If you want a hidden place for chargers, the drawer model is the one to look at.

How much floor space does a wall mounted nightstand save?

The listings say the floor beneath stays open for cleaning. Projection into the room is 9.6 inches (Homode) or 13 inches (Nathan James). The WDSHIYI listing mentions four legs, so check the photos to see whether it touches the floor.

Products worth checking

We have not tested these products. Sizes and features come from the Amazon listings as we read them; where a listing does not say, we say so.

Homode Floating Nightstand, 2 Tier Wall Mounted Nightstand with Cable Hole

listed dimensions: 9.6″D x 16″W x 7.8″H; Product Dimensions: 9.6″D x 16″W x 7.8″H

See details on Amazon Affiliate link

Floating Nightstand Wall Mounted Bedside Shelf Handmade Bedroom Furniture,Pine Wood Floating Bedside Table, Minimalist and Unique Style 17.5”x 9.5”x 8” Brown

listed dimensions: 17.5″D x 9.5″W x 8″H; Product Dimensions: 17.5″D x 9.5″W x 8″H

See details on Amazon Affiliate link

Nathan James Jackson Wall Mounted Floating Bedroom Nightstand with Storage Drawer and Modern Open Shelf Cubby, Light Oak Wood

listed dimensions: 13″D x 16″W x 9″H; Product Dimensions: 13″D x 16″W x 9″H

See details on Amazon Affiliate link

Sources checked

Specifications come from the Amazon listings as we read them for this guide. Product details and availability can change, so confirm on the product page before you buy.

How we research our guides