As an Amazon Associate I earn from qualifying purchases. Links marked “Affiliate link” may earn us a commission at no extra cost to you.
For a small home office, a corner printer stand gives a printer its own footprint and keeps paper and cords off the desk. Two corner printer stands are covered here. The YAOHUOO stand is 20 inches on each side with a fabric drawer and a power outlet, and the MAHANCRIS stand is a larger three-tier unit with two outlets and two USB ports. Check the printer’s footprint and weight first, because neither listing states a load for the shelves. For related storage ideas, see the corner storage shelf guide and the home office desk comparison.
The two stands at a glance
Figures come from each product’s Amazon listing. Confirm them on the product page before buying.
| Stand | Dimensions (listing) | Storage (listing) | Power (listing) | Load (listing) |
|---|---|---|---|---|
| YAOHUOO Corner Printer Stand, Corner Table with Power Outlet/Fabric Drawer | 20 x 20 x 32 in (spec field); 34 in high in the bullet text | Fabric drawer and side pocket | One power outlet | The listing does not state |
| MAHANCRIS Corner Printer Stand with Charging Station, 3-Tier Large Printer Table | 23.4 L x 17.3 W x 30 H in | Three tiers | Power strip with 2 outlets, 2 USB ports and a 4.9 ft cord | The listing does not state |
Product by product
YAOHUOO Corner Printer Stand, Corner Table with Power Outlet/Fabric Drawer
Affiliate link
- Dimensions: the spec field gives 20 by 20 by 32 inches. The bullet text gives 20 inches on each side and 34 inches high. Confirm the height on the product page.
- Shape: a triangular corner design, according to the bullet text.
- Storage: a fabric drawer and a side pocket for printer paper and supplies.
- Power: one outlet, according to the bullet text.
- Color: rustic brown. The style is listed as modern.
- Load: the listing does not state a load for the shelf or the drawer.
This stand suits a corner where the printer is small and a drawer for paper is useful. The height conflict and the missing load are the two things to confirm before ordering.
MAHANCRIS Corner Printer Stand with Charging Station, 3-Tier Large Printer Table
Affiliate link
- Dimensions: 23.4 inches long, 17.3 inches wide, 30 inches high (spec field and bullet text).
- Shape: a polygonal corner design, according to the bullet text.
- Power: a power strip with two outlets, two USB ports and a 4.9 ft cord, according to the bullet text.
- Storage: three tiers. The bullet text describes the stand as fitting large printers.
- Color: rustic brown. The style is listed as modern.
- Feet: the product title is cut off at “Adjustable Fee” in the text available, so confirm whether the feet adjust.
- Load: the listing does not state a load.
This is the larger unit and the better choice if the printer is big or if you want charging at the same spot. Its 23.4 inch length takes more corner space than the YAOHUOO, so measure the corner before buying.
Measure the corner and the printer
Measure both walls of the corner from the inside of the corner to the nearest door, window or radiator. Then measure the printer’s width and depth, and add room for the paper tray to open and for the cord to reach the outlet. The stands here are 20 to 23.4 inches on each side, so a printer wider than about 18 inches will not fit well on either tier without overhang. Check the printer’s footprint on its own product page, because the listings here do not describe any printer models.
Power and cords
The MAHANCRIS stand lists two outlets and two USB ports on a cord, so the printer and a laptop can charge from the same spot. The YAOHUOO stand lists one outlet. Plan the cord route, and check whether a surge protector is needed for the printer and computers. The listings do not describe surge protection.
What this set does not cover
The keyword this guide was written for asked about a small home office storage plan. The products in this set are corner printer stands only. No file cabinet, shelving system or desk organizer in this group has usable specifications for a small office, so this guide does not cover those items.
Mistakes to avoid
- Buying a stand without measuring the printer. Both stands are sized for a corner, not for a particular printer.
- Trusting one height figure. The YAOHUOO listing gives two heights.
- Putting heavy printers on the top tier. Neither listing states a load.
- Blocking the paper tray or the cord. Leave room in front of the stand.
Who may not need a printer stand
If the printer sits on a desk that has room and a power outlet nearby, a corner stand adds cost for little gain. A stand is most useful when the desk corner is the only free space or when the printer blocks the work surface.
Frequently asked questions
Which stand has more power?
The MAHANCRIS stand lists two outlets and two USB ports. The YAOHUOO stand lists one outlet.
Which stand is taller?
The YAOHUOO stand is listed at 32 inches in the spec field and 34 inches in the bullet text. The MAHANCRIS stand is 30 inches.
Do either of these have a load rating?
Neither listing states a load for the shelves.
Next step
Measure the corner, measure the printer, and check the outlet position. Then choose the stand whose height, power and storage match the desk, and confirm the height and load on the product page before you order.
