As an Amazon Associate I earn from qualifying purchases. Links marked “Affiliate link” may earn us a commission at no extra cost to you. Learn more.
Modern JP Adhesive Display Shelf is the smallest of the three by listed floor footprint, at 0.05 sq ft, and WINKINE Floating Display Shelves Compatible is the largest, at 0.62 sq ft. 12-Pack Wall Shelves for Funko Pop lists 4″ D × 5″ W × 0.58″ H; WINKINE lists 5.28″ D × 16.9″ W × 15.4″ H; Modern JP Adhesive Display Shelf lists 2.9″ D × 2.7″ W × 1.25″ H. Specifications come from Amazon listing data checked October 3, 2026; we have not tested these products. Confirm the selected variant on Amazon before ordering, because titles and specification fields can change.
Quick compare: the products in this guide
Sizes come from the Amazon listings as we read them; check the product page for the current details before you buy.
| Product | Listed details | Link |
|---|---|---|
| 12-Pack Wall Shelves for Funko Pop Figures, Boxed or Unboxed, 5X4 Inches | 4″D x 5″W x 0.58″H; material Acrylic | See details on Amazon Affiliate link |
| WINKINE Floating Display Shelves Compatible with 21 Funko Pop in Box, Acrylic… | 5.28″D x 16.9″W x 15.4″H; material Upgraded 5mm Thick Acrylic | See details on Amazon Affiliate link |
| Modern JP Adhesive Display Shelf for Funko Pop Boxes (16-Pack) – Clean Mount… | 2.9″D x 2.7″W x 1.25″H; material Plastic | See details on Amazon Affiliate link |
Three options at a glance
| Pick | Listed dimensions | Floor footprint | Footprint rank |
|---|---|---|---|
| 12-Pack Wall Shelves for Funko Pop | 4″ D × 5″ W × 0.58″ H | 20 sq in (0.14 sq ft) | Middle |
| WINKINE Floating Display Shelves Compatible | 5.28″ D × 16.9″ W × 15.4″ H | 89.23 sq in (0.62 sq ft) | Largest |
| Modern JP Adhesive Display Shelf | 2.9″ D × 2.7″ W × 1.25″ H | 7.83 sq in (0.05 sq ft) | Smallest |
1. 12-Pack Wall Shelves for Funko Pop Figures, Boxed or Unboxed, 5X4 Inches — Middle listed footprint
Listed details: dimensions 4″ D × 5″ W × 0.58″ H; item weight 1.6 ounces; material Acrylic; color D.
This pack contains 12 clear acrylic wall shelves, each listed at 4 inches deep and 5 inches wide with a 0.58-inch height, or 0.14 sq ft per shelf. The title says it fits Funko Pop figures, boxed or unboxed, and the bullets say it also suits anime and action figures. Each ledge is listed as holding up to 2 lbs and the shelves come with screws. The listing says you can arrange them vertically or horizontally. The item weight is listed as 1.6 ounces. The listing does not describe a backing or how the figures are kept from sliding off the front.
Pros
- 12 individual shelves in one pack, so you can build a custom layout
- States a 2 lb limit per ledge, the only stated load rating of the three
- Screws are included for a fixed mount
Cons
- Each shelf is only 4 inches deep, which may be tight for a boxed figure the other listing sizes at about 3.5 x 4.5 inches
- Screws mean drilling into the wall; the listing mentions no adhesive option
- The listing does not say whether shelves have a front lip to keep figures from sliding
Who it is for / who should skip it: Pick it if you want many small single-figure spots arranged your own way and are fine drilling. Skip it if you rent and cannot make holes, or want one big display unit.
2. WINKINE Floating Display Shelves Compatible with 21 Funko Pop in Box, Acrylic Shelves for Wall, Clear Figures Display Case for Boxed Characters, Stackable Collectibles Figure Stand, 2 Pack (Clear) — Largest listed footprint
Listed details: dimensions 5.28″ D × 16.9″ W × 15.4″ H; item weight 1.86 kg; material Upgraded 5mm Thick Acrylic; color Clear.
The WINKINE set has 2 floating acrylic shelves, listed at 5.28 inches deep, 16.9 inches wide and 15.4 inches high as assembled, or 0.62 sq ft, the largest footprint of the three. The listing says each shelf displays up to 9 boxed Funko Pops, and that both shelves together hold 21. Those two numbers do not add up (2 x 9 = 18), so check the capacity before you buy. The material is listed as 5mm thick acrylic, clear, and the item weight is 1.86 kg. The listing says assembly takes about 3 minutes per shelf and that it fits Pop Stacks and PopShield protectors.
Pros
- Holds boxed Pops, including ones in protectors such as PopShield, per the listing
- 5mm thick acrylic, described as resisting yellowing and warping
- Two shelves mount together for a larger display
Cons
- The listing claims 9 per shelf and 21 across both shelves, but 2 x 9 is 18, so the real capacity is unclear
- At 16.9 inches wide and 15.4 inches high it takes the most wall space of the three
- The data does not state a weight capacity per shelf
Who it is for / who should skip it: Pick it if your Pops are boxed or in protectors and you want a ready-made two-shelf display. Skip it if you want single-figure spots or a confirmed capacity.
3. Modern JP Adhesive Display Shelf for Funko Pop Boxes (16-Pack) – Clean Mount for Funko Pop Display – Easy Adhesive Install – Box-Safe, No-Drill Setup – Clear — Smallest listed footprint
Listed details: dimensions 2.9″ D × 2.7″ W × 1.25″ H; item weight 0.25 kg; material Plastic; color Clear.
The Modern JP pack has 16 small clear plastic shelves made for Funko Pop boxes. Each is listed at 2.9 inches deep, 2.7 inches wide and 1.25 inches high, which is 0.05 sq ft, the smallest footprint here. The bullets say the shelves fit standard boxes of about 3.5 inches deep by 4.5 inches wide, which is bigger than the listed shelf size, so the listing contradicts itself and the dimensions should be verified. Each shelf includes both strong adhesive and optional screws, so you can choose a no-drill mount. The material is listed as plastic and the set weighs 0.25 kg.
Pros
- 16 shelves in one pack, the most of the three
- Adhesive and optional screws included, so you can avoid drilling
- Smallest footprint on the wall at 0.05 sq ft per shelf (2.9 x 2.7 / 144, rounded)
Cons
- The listed shelf size (2.9″ x 2.7″) is smaller than the box size the listing says it fits (about 3.5″ x 4.5″), so verify fit
- Plastic rather than acrylic, and the listing states no weight capacity
- Adhesive mounting depends on the wall surface; the listing does not say which surfaces it suits
Who it is for / who should skip it: Pick it if you want a many-shelf no-drill setup for boxed Pops, after confirming the box fits. Skip it if you want a stated load rating.
What to check before buying shelves for funko pops
Start with how you store your Pops: in the box, in a protector, or out of the box. The WINKINE listing says it holds boxed Pops, including those in protectors such as PopShield. The Modern JP listing says its shelves fit boxes of about 3.5 inches deep by 4.5 inches wide. The 12-pack says boxed or unboxed, 4 by 5 inches per shelf.
Second, check the shelf size against your figures. The 12-pack shelves are 4 inches deep by 5 inches wide. The Modern JP shelves are listed at 2.9 by 2.7 inches, which is smaller than the box size its own bullet gives, so verify before you buy. The WINKINE shelves are 5.28 inches deep and 16.9 inches wide as assembled.
Third, count the spots. The 12-pack gives 12 single shelves, the Modern JP pack 16, and the WINKINE two shelves. The WINKINE listing says 9 per shelf and 21 across both, but 2 x 9 is 18, so plan on the lower number until you confirm it.
Fourth, wall mounting. The 12-pack includes screws. The Modern JP pack includes adhesive and optional screws. The WINKINE listing describes wall mounting but the data does not say which hardware is included. If you rent, adhesive is the easier route, but test it on a hidden spot first.
Fifth, load. The 12-pack says each ledge holds up to 2 lbs. The other two listings do not state a weight capacity. Most Pops are light, but a stack of boxed figures adds up.
Worked example: fit math for these three options
This worked example is our own planning arithmetic from the listed dimensions, not test results. The wall length and walkway width are assumed example values; replace them with your measurements.
Wall example. Assume 36 inches of clear wall.
- 12-Pack Wall Shelves for Funko Pop: 36 − 5 = 31 inches spare; centred, 15.5 inches on each side before trim, plugs or curtains.
- WINKINE Floating Display Shelves Compatible: 36 − 16.9 = 19.1 inches spare; centred, 9.55 inches on each side before trim, plugs or curtains.
- Modern JP Adhesive Display Shelf: 36 − 2.7 = 33.3 inches spare; centred, 16.65 inches on each side before trim, plugs or curtains.
Footprint. Depth × width, converted at 144 square inches per square foot:
- 12-Pack Wall Shelves for Funko Pop: 4 × 5 = 20 sq in, or 0.14 sq ft.
- WINKINE Floating Display Shelves Compatible: 5.28 × 16.9 = 89.23 sq in, or 0.62 sq ft.
- Modern JP Adhesive Display Shelf: 2.9 × 2.7 = 7.83 sq in, or 0.05 sq ft.
Mistakes to avoid
- Not measuring the box. Boxed Pops are about 3.5 by 4.5 inches according to one listing. A shelf listed at 2.9 by 2.7 inches may not hold one safely.
- Taking the capacity claim at face value. The WINKINE listing says 9 per shelf and 21 total, yet 2 x 9 is 18. Count on the lower number.
- Assuming adhesive works on every wall. The Modern JP listing offers adhesive, but textured paint or wallpaper can defeat it. Use the included screws if the wall is not smooth.
- Spacing shelves too tightly. Each 12-pack shelf is 4 by 5 inches, so leave room above for the figure’s height and for your hand to lift it out.
Related guides
- best black and white floating shelves
- best floating shelves for a home office
- best monitor stands and desk shelves
Frequently asked questions
Which shelves hold boxed Funko Pops?
The WINKINE listing says it holds boxed Pops, including those in protectors like PopShield and Pop Stacks. The Modern JP listing says its shelves are made for Pop boxes, though its listed shelf size conflicts with its box size. The 12-pack says boxed or unboxed.
Do I have to drill into the wall?
Not with the Modern JP pack, which includes strong adhesive plus optional screws. The 12-pack lists screws and the data does not mention adhesive. The WINKINE listing describes wall mounting, but the data does not state which hardware comes with it, so check the full listing if you rent.
How much weight can each shelf hold?
The 12-pack states that each ledge holds up to 2 lbs. The WINKINE and Modern JP listings do not state a weight capacity in the data we have. A single Pop is light, but a boxed stack or heavier figure adds weight, so ask the seller if you plan to load a shelf fully.
How many Pops does the WINKINE set display?
The listing says up to 9 boxed Pops per shelf and 21 across both shelves. Two shelves at 9 each is 18, so those numbers conflict. Treat 18 as the safer estimate and confirm with the seller before you plan a collection of 21.
Products worth checking
We have not tested these products. Sizes and features come from the Amazon listings as we read them; where a listing does not say, we say so.
12-Pack Wall Shelves for Funko Pop Figures, Boxed or Unboxed, 5X4 Inches
See details on Amazon Affiliate linkWINKINE Floating Display Shelves Compatible with 21 Funko Pop in Box, Acrylic Shelves for Wall, Clear Figures Display Case for Boxed Characters, Stackable Collectibles Figure Stand, 2 Pack (Clear)
See details on Amazon Affiliate linkModern JP Adhesive Display Shelf for Funko Pop Boxes (16-Pack) – Clean Mount for Funko Pop Display – Easy Adhesive Install – Box-Safe, No-Drill Setup – Clear
See details on Amazon Affiliate linkSources checked
- US Access Board guide to clear width
- Amazon listing for 12-Pack Wall Shelves for Funko Pop Figures, Boxed or Unboxed, 5X4 Inches
- Amazon listing for WINKINE Floating Display Shelves Compatible with 21 Funko Pop in Box, Acrylic Shelves for Wall, Clear Figures Display Case for Boxed Characters, Stackable Collectibles Figure Stand, 2 Pack (Clear)
- Amazon listing for Modern JP Adhesive Display Shelf for Funko Pop Boxes (16-Pack) – Clean Mount for Funko Pop Display – Easy Adhesive Install – Box-Safe, No-Drill Setup – Clear
Specifications come from the Amazon listings as we read them for this guide. Product details and availability can change, so confirm on the product page before you buy.
