Toilet Paper Rolls Storage

As an Amazon Associate I earn from qualifying purchases. Links marked “Affiliate link” may earn us a commission at no extra cost to you. Learn more.

Three toilet paper rolls storage options are compared here by listed floor footprint. The iDesign Freestanding Bathroom Toilet Paper Storage is the smallest at 0.48 sq ft, the Lifewit Toilet Paper Storage Holder sits in the middle at 0.79 sq ft, and the Toilet Paper Holder Stand is the largest at 1.1 sq ft. These figures come from the listed dimension fields, which conflict with some bullets in the listings, so verify before you plan a gap. Specifications come from Amazon listing data checked October 3, 2026, and we have not tested these products.

Quick compare: the products in this guide

Sizes come from the Amazon listings as we read them; check the product page for the current details before you buy.

Product	Listed details	Link
iDesign Freestanding Bathroom Toilet Paper Storage Holder, Matte Black	6.95″L x 9.9″W	See details on Amazon Affiliate link
Toilet Paper Holder Stand (with Reserve Function), Free-Standing Storage	24″L x 6.6″W	See details on Amazon Affiliate link
Lifewit Toilet Paper Storage Holder, Extra Large Stand Basket, 30L, White	16.93″L x 6.69″W	See details on Amazon Affiliate link

Three options at a glance

Pick	Listed dimensions	Floor footprint	Footprint rank
iDesign Freestanding Bathroom Toilet Paper Storage	6.95″ L × 9.9″ W	68.81 sq in (0.48 sq ft)	Smallest
Toilet Paper Holder Stand	24″ L × 6.6″ W	158.4 sq in (1.1 sq ft)	Largest
Lifewit Toilet Paper Storage Holder	16.93″ L × 6.69″ W	113.26 sq in (0.79 sq ft)	Middle

1. iDesign Freestanding Bathroom Toilet Paper Storage Holder, Matte Black — Smallest listed footprint

Listed details: dimensions 6.95″ L × 9.9″ W; material Plastic; color Black.

The iDesign Freestanding Bathroom Toilet Paper Storage Holder in matte black is a plastic canister that keeps 3 spare rolls covered, with a nesting lid. The bullets give the canister as 6.22″ in diameter and 15.37″ tall, with internal dimensions of 5.58″ at the widest point. The dims field lists 6.95″ L × 9.9″ W (0.48 sq ft), which does not match a 6.22″ round canister, so verify the footprint before you plan a gap. The listing says it tucks beside the toilet or in a corner and cleans with mild soap and water. It does not state an item weight.

Pros

• Nesting lid keeps the 3 spare rolls covered
• Plastic body cleans with mild soap and water, per the listing
• Canister size is given precisely: 6.22″ diameter × 15.37″ tall

Cons

• Holds only 3 spare rolls, the lowest stated count of the three
• The dims field (6.95″ × 9.9″) does not match the 6.22″ canister diameter, so verify the footprint
• The listing states no item weight and no roll size

Who it is for / who should skip it: Pick it for a corner beside the toilet when you only need a few spare rolls hidden. Skip it if you buy rolls in bulk.

2. Toilet Paper Holder Stand (with Reserve Function), Free-Standing Storage — Largest listed footprint

Listed details: dimensions 24″ L × 6.6″ W; item weight 0.32 kg; material Stainless Steel; color Matte Black.

The Toilet Paper Holder Stand (with Reserve Function) is a free-standing stainless steel stand in matte black. The listing says it holds 4 rolls of 6″ thick king or jumbo toilet paper, weighs 0.32 kg, and installs in 1 minute following the assembly manual. Its size is inconsistent: the dims field says 24″ L × 6.6″ W (1.1 sq ft), but a bullet says D 6.6″ × W 6.6″ × H 24″, so the 24″ appears to be height and the base is 6.6 × 6.6 (about 0.30 sq ft). Verify before ranking it by floor space. The listing does not mention a lid.

Pros

• Stainless steel with a matte black finish, listed as easy to clean
• Holds 4 rolls of 6″ thick king or jumbo paper
• Listing gives a weight of 0.32 kg and a 1 minute installation

Cons

• Footprint not comparable: the dims field (24″ × 6.6″) conflicts with the bullet (6.6″ × 6.6″ × 24″ H), so verify before you buy
• At 24″ tall it is the tallest of the three
• No lid or cover is mentioned, so the rolls stay visible

Who it is for / who should skip it: Pick it if you want an open stand for big rolls and can spare 24″ of height. Skip it if you want rolls hidden or need a confirmed floor size.

3. Lifewit Toilet Paper Storage Holder, Extra Large Stand Basket, 30L, White — Middle listed footprint

Listed details: dimensions 16.93″ L × 6.69″ W; item weight 0.73 kg; material Polyester，Bamboo lid; color White.

The Lifewit Toilet Paper Storage Holder is a 30L white stand basket with a bamboo lid, listed at 16.93″ L × 6.69″ W (0.79 sq ft) and 16.1″ H in the bullets. The listing says it holds up to 16 regular rolls or 12 mega rolls. It is made of Oxford fabric on a bamboo frame, described as moisture and dust resistant, with 4 detachable bamboo support rods that let it stand up straight. The item weight is 0.73 kg. It is the only one of the three with a fabric body, and the bullets do not say how long assembly takes.

Pros

• Largest stated capacity: up to 16 regular rolls or 12 mega rolls
• Bamboo lid covers the contents
• 4 detachable support rods let it stand upright; listed at 30L

Cons

• A long, narrow shape: 16.93″ × 6.69″ (0.79 sq ft) needs a gap about 17″ long
• The body is fabric held upright by 4 rods, not a rigid shell
• The listing gives no assembly time, and the count drops from 16 to 12 for mega rolls

Who it is for / who should skip it: Pick it if you buy rolls in bulk and have a long, narrow gap. Skip it if you only need a few rolls or want a rigid body.

What to check before buying toilet paper rolls storage

Toilet paper storage in a small bathroom comes down to how many rolls it holds, how much floor it takes, and whether it hides the rolls. In order:

1. Roll count and roll type. The iDesign holds 3 spare rolls. The Toilet Paper Holder Stand holds 4 rolls of 6″ thick king or jumbo paper. The Lifewit holds up to 16 regular rolls or 12 mega rolls.

1. Real floor footprint. The Lifewit lists 16.93″ × 6.69″ (0.79 sq ft). The Stand’s dims field says 24″ × 6.6″ (1.1 sq ft), but a bullet says D 6.6″ × W 6.6″ × H 24″, so the 24″ is height and the base is 6.6 × 6.6 (about 0.30 sq ft). The iDesign dims field says 6.95″ × 9.9″ (0.48 sq ft), yet its canister is 6.22″ in diameter. Measure your gap and verify these two before trusting any footprint.

1. Height. The iDesign is 15.37″ tall, the Lifewit is 16.1″ high and the Stand is 24″ tall. Check any shelf or window ledge above the spot.

1. Cover or open. The iDesign has a nesting lid and the Lifewit has a bamboo lid. The Stand’s listing mentions no lid, so its rolls stay visible.

1. Material and cleaning. The iDesign is plastic, cleaned with mild soap and water. The Stand is stainless steel, described as easy to clean. The Lifewit is Oxford fabric with a bamboo frame, described as moisture and dust resistant, and the listing gives no washing instructions.

1. Setup. The Stand lists a 1 minute installation using the assembly manual. The Lifewit stands on 4 detachable support rods. The iDesign listing states no assembly.

Short rule: a few hidden spares, iDesign; big rolls on a slim open stand, Stand; bulk buying with a long narrow gap, Lifewit.

Worked example: fit math for these three options

This worked example is our own planning arithmetic from the listed dimensions, not test results. The wall length and walkway width are assumed example values; replace them with your measurements.

Wall example. Assume 24 inches of clear wall.

• iDesign Freestanding Bathroom Toilet Paper Storage: 24 − 9.9 = 14.1 inches spare; centred, 7.05 inches on each side before trim, plugs or curtains.
• Toilet Paper Holder Stand: 24 − 6.6 = 17.4 inches spare; centred, 8.7 inches on each side before trim, plugs or curtains.
• Lifewit Toilet Paper Storage Holder: 24 − 6.69 = 17.31 inches spare; centred, 8.65 inches on each side before trim, plugs or curtains.

Walkway example. The US Access Board gives 36 inches as the minimum clear width for an accessible route. That figure is a yardstick, not a rule for private homes. To keep 36 inches clear beside each product, the walkway between it and the opposite obstacle must be at least 36 inches plus its depth:

• iDesign Freestanding Bathroom Toilet Paper Storage: 36 + 6.95 = 42.95 inches of total path width.
• Toilet Paper Holder Stand: 36 + 24 = 60 inches of total path width.
• Lifewit Toilet Paper Storage Holder: 36 + 16.93 = 52.93 inches of total path width.

Footprint. Depth × width, converted at 144 square inches per square foot:

• iDesign Freestanding Bathroom Toilet Paper Storage: 6.95 × 9.9 = 68.81 sq in, or 0.48 sq ft.
• Toilet Paper Holder Stand: 24 × 6.6 = 158.4 sq in, or 1.1 sq ft.
• Lifewit Toilet Paper Storage Holder: 16.93 × 6.69 = 113.26 sq in, or 0.79 sq ft.

Mistakes to avoid

• Trusting a size field without checking the bullets. The Stand’s dims field says 24″ L × 6.6″ W, but a bullet says 6.6″ × 6.6″ × 24″ H. The iDesign dims field does not match its 6.22″ canister diameter either.
• Counting rolls without the roll type. The Stand is listed for 6″ thick king or jumbo rolls, and the Lifewit for 16 regular or 12 mega. The iDesign listing states no roll size, so do not assume jumbo rolls fit its 3-roll canister.
• Forgetting height. These run 15.37″, 16.1″ and 24″ tall. Check what sits above the spot, such as a shelf or window ledge.
• Assuming the rolls will be covered. Only the iDesign (nesting lid) and the Lifewit (bamboo lid) list a cover. The Stand’s listing mentions none.

Related guides

• best over the toilet storage cabinets
• best cube storage organizers for small rooms
• best storage cabinets for home office

Frequently asked questions

How many toilet paper rolls can each of these hold?

Per the listings, the iDesign holds 3 spare rolls, the Toilet Paper Holder Stand holds 4 rolls of 6″ thick king or jumbo paper, and the Lifewit holds up to 16 regular rolls or 12 mega rolls. Roll size changes the count, so match it to the paper you actually buy.

Which one takes up the least floor space?

Do not rely on the dims fields. The Stand’s bullet gives a 6.6″ × 6.6″ base (about 0.30 sq ft), while its dims field implies 1.1 sq ft. The iDesign dims field says 0.48 sq ft but its canister is 6.22″ in diameter. The Lifewit’s 0.79 sq ft matches its bullet. Verify before ordering.

Do these toilet paper holders have lids?

The iDesign lists a nesting lid that keeps its 3 spare rolls covered, and the Lifewit lists a bamboo lid. The Toilet Paper Holder Stand listing does not mention a lid, so it appears to be an open stand with the rolls visible.

Are they easy to clean?

The iDesign listing says to clean it with mild soap and water. The Stand is stainless steel described as easy to clean. The Lifewit is Oxford fabric and bamboo described as moisture and dust resistant, but the listing gives no washing instructions, so check the full listing for care details.

Products worth checking

We have not tested these products. Sizes and features come from the Amazon listings as we read them; where a listing does not say, we say so.

Sources checked

• US Access Board guide to clear width
• Amazon listing for option 1
• Amazon listing for option 2
• Amazon listing for option 3

Specifications come from the Amazon listings as we read them for this guide. Product details and availability can change, so confirm on the product page before you buy.

How we research our guides