As an Amazon Associate I earn from qualifying purchases. Links marked “Affiliate link” may earn us a commission at no extra cost to you. Learn more.
A matched wood nightstand set of 2 fits a small bedroom when each table fits the gap beside the bed with room to slide it and clean behind it. This guide covers one verified set in full: the INNOD Fluted Nightstands Set of 2. Its listing gives 19 inches deep, 24 inches wide and 12 inches high. On a queen bed centered on a 120 inch wall, each side has a 30 inch gap, so this set leaves 6 inches between each table and the wall. The listing also disagrees with itself on finish: the specs say walnut, and a bullet describes a pure white finish. Confirm the color on the product page.
Quick compare
Sizes and details come from the Amazon listing. Check the product page for current details before you buy.
| Set | Listed size (D x W x H) | Item weight | Storage per table | Link |
|---|---|---|---|---|
| INNOD Fluted Nightstands Set of 2, Modern Bedside Table with Storage Drawer and Open Wood Shelf | 19 x 24 x 12 in | 30 lb (listing does not say per table or for the pair) | 1 drawer and 1 open shelf | Open the listing Affiliate link |
Why a matched pair matters in a small bedroom
A matched pair gives the same storage on both sides of the bed, which makes a tight room look planned. It also gives two surfaces for a lamp, a phone and a glass of water without needing a dresser nearby.
The finish matters as much as the style name. The INNOD listing names walnut in its color and top-color fields, but a bullet describes a pure white finish with wood-grain details. Compare the photos on the product page with the color you expect before you order.
Key measurements before you buy
Measure these four things in your room first.
- Gap beside the bed. Measure from the mattress edge to the wall, a door, or other furniture, on each side. The two sides are often different.
- Table depth. The listing gives 19 inches of depth. That projects along the side of the bed, so check it against the space you have there.
- Mattress top height. The listing gives 12 inches of height. Compare it with the top of your mattress. A table much lower than the mattress puts a lamp and a glass further from your hand when you lie down.
- Door swings and outlets. A door sweeps an arc into the room. Keep the table out of that arc.
Worked example: fitting the set beside a queen bed
This example is our own estimate. It uses a standard US queen mattress, 60 inches wide, centered on a 120 inch wall.
- Step 1: 120 inches of wall minus 60 inches of bed leaves 60 inches for both sides.
- Step 2: 60 divided by 2 gives 30 inches on each side.
- Step 3: 30 inches minus the 24 inch table width leaves 6 inches between each table and the wall.
- Step 4: The table projects 19 inches along the side of the mattress. A queen mattress is 80 inches long, so the table stays well inside the bed’s length.
The 6 inches is the gap between the table and the wall, not a walkway. The set fits the wall in this example, but you still need to check the clear path past the foot of the bed and beside each table.
Who should buy this set
Buy this set if the gap on each side of your bed is at least 24 inches, you want a low, wide table with a drawer and an open shelf, and your mattress top sits close enough to 12 inches that the table is easy to reach.
Who should skip it
Skip it if the gap beside your bed is under 24 inches, because the table would have no margin. Skip it if you need a taller table for a high mattress, or more than one drawer per table. Skip it if you need a confirmed walnut finish, since the listing’s color data and its bullets disagree. Skip it if you need a weight per table: the listing gives 30 pounds for an item count of 2 and does not say whether that is per table or for the pair. For other bedside options, see dark grey nightstands.
Common mistakes when buying a wood nightstand set of 2
- Measuring only one side of the bed. Gaps are often unequal.
- Ignoring the listed height. A 12 inch table can sit well below the top of a standard mattress.
- Treating one listing as settled. The finish and material fields disagree, so confirm them on the product page.
- Dragging the table across the floor. Lift it instead, since dragging can scratch the floor and loosen joints.
Frequently asked questions
How wide should a nightstand set be for a queen bed?
On a 120 inch wall with a queen bed, each side gets about 30 inches (our own estimate). A table 24 inches wide leaves 6 inches between the table and the wall.
Is this set low enough for a platform bed?
Its 12 inch height suits a low bed. Compare it with your mattress top before you order, because a table much lower than the mattress is harder to reach from bed.
Does the set include charging outlets?
The listing does not mention outlets or charging ports. Its description covers one drawer and an open shelf per table, so plan for cords separately.
Is it solid wood?
The specs list engineered wood as the frame material, and one bullet says the body is MDF. The listing does not describe it as solid wood.
Products worth checking
We have not tested this product. Sizes and features come from the Amazon listing. Where a listing does not say, we say so.
Fluted Nightstands Set of 2, Modern Bedside Table with Storage Drawer and Open Wood Shelf, Wood End Table Mid Century Night Stands, Walnut Brown
ASIN: B0GJ58JYKB Affiliate link
- Brand: INNOD. Listed size: 19 in deep, 24 in wide, 12 in high
- Item weight: 30 pounds (the listing does not say whether this is per table or for the pair)
- Frame: engineered wood. A bullet says MDF. Color: walnut in the spec table, pure white in a bullet
- Storage: 1 drawer and an open shelf per table, according to the listing
- Assembly: the listing says hex key and screwdriver are needed, and that hardware and instructions are included
Specifications come from the Amazon listing. Product details can change, so confirm on the product page before you buy.
