42 Inch Table Buying Guide

As an Amazon Associate I earn from qualifying purchases. Links marked “Affiliate link” may earn us a commission at no extra cost to you. Learn more.

Industrial High Pub Table 42″ Vintage has the smallest listed footprint at 2.7 sq ft, and NUTIKAS 42 Inch Round Dining Table has the largest at 12.25 sq ft. The NUTIKAS lists 42″ D × 42″ W × 29.5″ H, the Industrial Bar Height Table lists 22″ D × 22″ W × 42″ H, and the Industrial High Pub Table lists 19.7″ D × 19.7″ W × 42″ H. Specifications come from Amazon listing data, and we have not tested these products. Confirm the selected variant on the product page before ordering.

Quick compare: the products in this guide

Sizes come from the Amazon listings as we read them; check the product page for the current details before you buy.

Product	Listed details	Link
NUTIKAS 42 Inch Round Dining Table for 4, Modern Black Wood Grain Kitchen…	42″D x 42″W x 29.5″H; 42″D x 42″W x 29.5″H	See details on Amazon Affiliate link
Industrial Bar Height Table – 22″ Round Wood Top, 42″ High Metal Frame, Black	22″D x 22″W x 42″H; 22″D x 22″W x 42″H	See details on Amazon Affiliate link
Industrial High Pub Table 42″ Vintage Bar Dinner Table for Home Kitchen…	19.7″D x 19.7″W x 42″H; 19.7″D x 19.7″W x 42″H	See details on Amazon Affiliate link

Three options at a glance

Pick	Listed dimensions	Floor footprint	Footprint rank
NUTIKAS 42 Inch Round Dining Table	42″ D × 42″ W × 29.5″ H	1764 sq in (12.25 sq ft)	Largest
Industrial Bar Height Table	22″ D × 22″ W × 42″ H	484 sq in (3.36 sq ft)	Middle
Industrial High Pub Table 42″ Vintage	19.7″ D × 19.7″ W × 42″ H	388.09 sq in (2.7 sq ft)	Smallest

1. NUTIKAS 42 Inch Round Dining Table for 4, Modern Black Wood Grain Kitchen Table with Cross Metal Legs, Circular Industrial Dinner Table for Small Spaces, Breakfast Nook, Apartment, Office — Largest listed footprint

Listed details: dimensions 42″ D × 42″ W × 29.5″ H; material Engineered Wood; frame Metal; color Black.

The NUTIKAS is a 42 inch round dining table in black engineered wood with a metal frame, in a contemporary style. The title says it is for 4. The listed size is 42 inches deep by 42 inches wide by 29.5 inches tall, which gives a 12.25 square foot footprint when measured as a 42 by 42 inch square. The bullets describe a pedestal cross base in reinforced metal, adjustable non-slip foot pads and a black wood grain finish said to resist fingerprints and be waterproof and scratch resistant. The listing does not state an item weight, a weight capacity or assembly details.

Pros

• Only one of the three where 42 inches is the tabletop diameter, so it works as a dining table
• Pedestal cross base leaves open legroom around the table, per the listing
• Adjustable foot pads are listed to protect floors and level the table

Cons

• Biggest footprint here, 12.25 sq ft measured as a 42 by 42 inch square, so it needs a real dining area
• The listing states no item weight and no weight capacity
• The bullets shown do not describe assembly, so check how it ships

Who it is for / who should skip it: Pick it if you need an actual dining surface with a 42 inch top. Skip it if you only have room for a small café or bar table.

2. Industrial Bar Height Table – 22″ Round Wood Top, 42″ High Metal Frame, Black — Middle listed footprint

Listed details: dimensions 22″ D × 22″ W × 42″ H; item weight 20 pounds; listed maximum weight 150 pounds; material Metal, Wood; frame Metal; color Black.

This listing is a bar-height table with a 22 inch round wood top on a 42 inch tall black metal frame, in an industrial style. The size is 22 inches deep by 22 inches wide by 42 inches tall, a 3.36 square foot footprint. The listing states a 20 pound item weight and a 150 pound maximum weight recommendation. The bullets say it has a solid wood top and a heavy-duty metal base, and that it comes with all necessary hardware and clear instructions. The listing positions it for bar stools, standing conversation and compact spaces, and does not state a footrest.

Pros

• Stated 150 pound maximum weight recommendation, the highest of the two that give one
• 22 inch round top on a 3.36 sq ft footprint
• Listing says hardware and instructions are included for assembly

Cons

• The 42 inches here is the height, not the tabletop width, so the top is only 22 inches across
• The listing does not mention a footrest
• Needs bar stools, since a 42 inch height does not suit dining chairs

Who it is for / who should skip it: Pick it if you want a bar-height spot for two stools in a corner. Skip it if you need a dining table or a surface for more than a couple of people.

3. Industrial High Pub Table 42″ Vintage Bar Dinner Table for Home Kitchen Farmhouse Round Coffee Table Rustic Cocktail Table for Parties (Copper) — Smallest listed footprint

Listed details: dimensions 19.7″ D × 19.7″ W × 42″ H; item weight 35.2 pounds; material Metal, Wood; color Copper.

The listing describes a copper industrial high pub table made of steel pipe with a wood top, with a footrest. The bullets list the height as 105 cm or 41.3 inches, while the title says 42 inches, and the footrest height as 36 cm or 14.17 inches. The tabletop diameter is 50 cm or 19.68 inches and 3 cm or 1.18 inches thick; the dimensions list 19.7 inches deep and wide, a 2.7 square foot footprint. The item weighs 35.2 pounds. The listing says the top and steel body are coated with water-resistant resin for indoor or outdoor use. It does not state a weight capacity.

Pros

• Smallest listed footprint at 19.7 × 19.7 inches (2.7 sq ft)
• Listing says the table is coated with water-resistant resin for indoor or outdoor use
• Includes a footrest listed at 14.17 inches high, with labeled parts and a manual

Cons

• The title says 42 inches but the bullet says 41.3 inches, so verify the height
• No weight capacity is stated, although it is the heaviest at 35.2 pounds
• A 19.68 inch top is small, so it suits a drink or a laptop more than a meal for two

Who it is for / who should skip it: Pick it if you want a small pub table that the listing says can also go on a patio. Skip it if you need a confirmed load rating or a large top.

What to check before buying 42 inch table

Start with what 42 inches means, because these three listings use it differently. The NUTIKAS is a 42 inch round dining table, so 42 inches is the tabletop diameter. The other two are 42 inch tall pub or bar tables, so 42 inches is the height. Decide which one you mean before anything else.

Second, compare footprints. The NUTIKAS lists 42 × 42 inches, which is 12.25 sq ft as a square. The 22 inch bar table lists 3.36 sq ft, and the copper pub table lists 19.7 × 19.7 inches, or 2.7 sq ft.

Third, match height to seating. At 29.5 inches the NUTIKAS suits dining chairs. At 42 inches, the other two need bar stools. The copper table lists 105 cm or 41.3 inches in its bullets while the title says 42, so verify its height.

Fourth, check the top size. A 22 inch top and a 19.68 inch top are small. Count what you need on the table at once, such as two plates or a laptop and a drink.

Fifth, look for load figures. The bar table lists 150 pounds. The NUTIKAS and the copper table list no weight capacity.

Sixth, read the weight and finish claims. The bar table lists 20 pounds and the copper table lists 35.2 pounds. The NUTIKAS lists none. The copper table says it is water resistant for indoor or outdoor use, and the NUTIKAS says its top is waterproof.

Choose the 22 inch bar table for a compact bar spot with a stated 150 pound limit. Choose the copper pub table for the smallest footprint, a footrest and possible patio use.

Worked example: fit math for these three options

This worked example is our own planning arithmetic from the listed dimensions, not test results. The wall length and walkway width are assumed example values; replace them with your measurements.

Wall example. Assume 60 inches of clear wall.

• NUTIKAS 42 Inch Round Dining Table: 60 − 42 = 18 inches spare; centred, 9 inches on each side before trim, plugs or curtains.
• Industrial Bar Height Table: 60 − 22 = 38 inches spare; centred, 19 inches on each side before trim, plugs or curtains.
• Industrial High Pub Table 42″ Vintage: 60 − 19.7 = 40.3 inches spare; centred, 20.15 inches on each side before trim, plugs or curtains.

Walkway example. The US Access Board gives 36 inches as the minimum clear width for an accessible route. That figure is a yardstick, not a rule for private homes. To keep 36 inches clear beside each product, the walkway between it and the opposite obstacle must be at least 36 inches plus its depth:

• NUTIKAS 42 Inch Round Dining Table: 36 + 42 = 78 inches of total path width.
• Industrial Bar Height Table: 36 + 22 = 58 inches of total path width.
• Industrial High Pub Table 42″ Vintage: 36 + 19.7 = 55.7 inches of total path width.

Footprint. Depth × width, converted at 144 square inches per square foot:

• NUTIKAS 42 Inch Round Dining Table: 42 × 42 = 1764 sq in, or 12.25 sq ft.
• Industrial Bar Height Table: 22 × 22 = 484 sq in, or 3.36 sq ft.
• Industrial High Pub Table 42″ Vintage: 19.7 × 19.7 = 388.09 sq in, or 2.7 sq ft.

Mistakes to avoid

• Mixing up diameter and height. A 42 inch table may be 42 inches across or 42 inches tall. Only the NUTIKAS has a 42 inch top.
• Pairing a bar-height table with dining chairs. The two 42 inch tall tables need bar stools, while the 29.5 inch NUTIKAS suits regular dining chairs.
• Using the footprint of a round table as a square. The 12.25 sq ft for the NUTIKAS is a 42 by 42 inch bounding square, not the area of the circle, so use it for floor planning only.
• Trusting an unconfirmed height. The copper table’s title says 42 inches while the bullet says 41.3 inches. Check it if the height matters for your stools.

Related guides

• best cube storage organizers for small rooms
• best narrow console tables for small entryways
• best computer desks for small spaces

Frequently asked questions

Is a 42 inch table 42 inches wide or tall?

It depends on the listing. The NUTIKAS has a 42 inch round top and stands 29.5 inches tall. The other two are 42 inch tall pub tables with tops of 22 inches and 19.7 inches, so check the dimensions before you buy.

Which one has the smallest footprint?

The copper industrial pub table lists the smallest footprint, 19.7 × 19.7 inches or 2.7 sq ft. The 22 inch bar table lists 3.36 sq ft. The NUTIKAS lists 12.25 sq ft measured as a 42 by 42 inch square.

Do any of these list a weight capacity?

Only the 22 inch bar table states one, a 150 pound maximum weight recommendation. The NUTIKAS and the copper pub table do not state a capacity, so ask the seller if you plan to put heavy items on them.

Can I use any of them outdoors?

The copper pub table listing says its top and steel body are coated with water-resistant resin for indoor or outdoor use. The bar table listing mentions patios as a use. The NUTIKAS listing does not mention outdoor use, so treat it as indoor.

Products worth checking

We have not tested these products. Sizes and features come from the Amazon listings as we read them; where a listing does not say, we say so.

Sources checked

• US Access Board guide to clear width
• Amazon listing for option 1
• Amazon listing for option 2
• Amazon listing for option 3

Specifications come from the Amazon listings as we read them for this guide. Product details and availability can change, so confirm on the product page before you buy.

How we research our guides