As an Amazon Associate we earn from qualifying purchases. Details
Candle holders for fireplace use are candelabras and pillar stands that sit on a mantel or hearth. Some listings say they can also go inside the firebox. The right one depends on your candle width, how many candles you want, and how much room the mantel has.
This guide compares five black iron and metal holders using only what each listing states about candle size, candle count, assembly, weight and placement. Measure your mantel and your candles first, and keep your fireplace manual close. All five are freestanding or tabletop holders, not wall mounts.
Quick answer
Choose the Smtyle candelabra if you want nine candles on one holder and the listing’s note on flameless or dripless candles. Choose the Candeldo if your pillar candles are 3 inches wide or narrower, because its listing caps pillar size there. Choose the 9-Tier matte black candelabra if you want nine plates and can spend about 10 minutes on assembly. Choose the nine-piece Pillar Fireplace Candle Holder set if you like a stepped arrangement of separate heights. Choose the six-arm Black Pillar holder if six candles are enough. Check your candle width first, because the listings give different plate and hole sizes.
Comparison table
| Product | Candles | Candle plate or cup (in) | Pieces | Assembly | Stated weight | Placement stated |
|---|---|---|---|---|---|---|
| Smtyle Black Fireplace Candelabra | 9 | Platform 3.5 | 1 | Not stated | 1.9 lb | Mantel or inside fireplace |
| Candeldo 9 Candle Holder | 9 | Holds pillars up to 3 | 1 (one bullet says 18) | Screws together | 1.5 lb | Inside fireplace, mantel or dining table |
| 9-Tier Matte Black Candelabra | 9 | Plates 3.5 | 1 | About 10 minutes | Not stated | Tabletop |
| Pillar Fireplace Candle Holder set | 9 | Cups 3.5 | 9 separate | Assemble the parts | 2.3 lb | Mantel, fireplace or dining room |
| Black Pillar 6-arm holder | 6 | Plates 3.5 | 6 listed | DIY assembly | 1.6 lb | Table or fireplace |
The five holders in detail
Smtyle Black Fireplace Candelabra, 9 holders for pillar candles
What it is: A black metal candelabra with nine arms and a 3.5-inch platform for each candle. The listing gives 16 x 8.2 x 7 inches, 1.9 pounds and a tabletop mount. It says the holder suits a mantel or the inside of a fireplace, that the arms are spaced for airflow, and that it suits flameless or dripless candles.
Who it suits: Someone who wants a single centered nine-candle display on a mantel that can take a freestanding piece.
Pros
- Nine candles on one holder
- 3.5-inch platforms
- Weight (1.9 lb) and height (7 in) are stated
Cons
- The footprint is labeled one way in the specs and another way in a bullet, so measure before you buy
- Assembly is not described
- The tipping and airflow claims are the maker’s own words
Skip if: Your pillar candles are wider than the platform, or you need a fixed mount.
View Smtyle candelabra on Amazon (affiliate link)
Candeldo 9 Candle Holder for inside fireplace, black metal candelabra
What it is: A black metal candelabra with nine holders in one piece. The listing gives 15.7 x 7.9 x 6 inches and 1.5 pounds, the lightest stated weight here. It says the holes fit pillars up to 3 inches and LED pillar candles, that the bases are not easily knocked over, and that it screws together. It lists use inside a fireplace, on a mantel or on a dining table.
Who it suits: A narrow hearth or mantel with thin pillar candles of 3 inches or less.
Pros
- Nine heights in a single piece
- Lightest stated weight in this group
- Listing names LED pillar candles as a fit
Cons
- Pillars wider than 3 inches will not fit
- One bullet says 18 pieces while the piece-count field says 1, so check what arrives
Skip if: Your pillar candles are wider than 3 inches.
View Candeldo candelabra on Amazon (affiliate link)
9-Tier Fireplace Candelabra Candle Holder, matte black metal
What it is: A nine-tier iron candelabra with a curved base and nine 3.5-inch plates. The listing gives 17.52 x 9.25 x 8.78 inches and calls it a tabletop piece. It says assembly takes about 10 minutes with pre-drilled holes and no complicated tools, and that the matte coating resists rust and fading.
Who it suits: A mantel with room for a long, tiered centerpiece.
Pros
- Nine 3.5-inch plates
- Assembly time is stated
- Pre-drilled holes and no complicated tools, per the listing
Cons
- No weight is stated
- The listing title is cut off before it names a placement
- Longest stated length in this group
Skip if: You want no assembly, or your mantel is shallow.
View 9-Tier candelabra on Amazon (affiliate link)
Pillar Fireplace Candle Holder set for inside fireplace, mantle decor
What it is: A set of nine separate black metal holders: one at 10 inches and two each at 8, 6, 5 and 3 inches. The cups are 3.5 inches across. The parts connect with embedded nuts and countersunk screws, and the set weighs 2.3 pounds. The listing says the black iron is rust-resistant and that the set ships in self-seal bags and inner boxes.
Who it suits: Someone who wants a stepped group of different heights on a mantel or sideboard and does not mind arranging it.
Pros
- Five different heights
- 3.5-inch cups
- Stated weight of 2.3 lb
Cons
- Nine parts mean more assembly and more pieces to store
- The listing gives no single overall size for the set
- The candle-fit bullet is cut off
Skip if: You want one piece or no assembly.
View Pillar Fireplace holder set on Amazon (affiliate link)
Black Pillar Candle Holders, 6-arm iron fireplace candelabra (DIY)
What it is: A six-arm black iron holder with a freestanding base and plates 3.5 inches across at heights of 2, 4, 4.8 and 7 inches. The listing gives 16.06 x 5.6 x 7.68 inches and 1.6 pounds. It says the holder takes real wax or flameless candles, and it needs DIY assembly.
Who it suits: A smaller mantel, a table, or anyone who prefers a six-candle centerpiece.
Pros
- Smaller footprint than the nine-candle options
- 3.5-inch plates
- Freestanding base
Cons
- Holds six candles, not nine
- The color field reads 6 Arms, which is a mislabel
- Width is 5.6 inches in the dimensions and 9.5 inches in another field
Skip if: You want nine candles or no assembly.
View Black Pillar 6-arm holder on Amazon (affiliate link)
Buying checklist
- Measure the candles you already own. Four listings give a 3.5-inch platform, plate or cup, and the Candeldo holds pillars up to 3 inches.
- Count the candles you will light. Four holders take nine and one takes six.
- Measure your mantel length and depth against the listed length, and treat any conflicting width as unconfirmed.
- Check where you plan to put it. Listings say mantel, tabletop or inside a fireplace, but follow the fireplace manual and the candle maker’s directions on heat and clearance.
- Allow time for assembly. The 9-Tier takes about 10 minutes, and the Pillar set has nine parts.
- Treat stability and airflow statements as the maker’s claims. None of the listings gives a fire-safety rating.
FAQ
Will these fit inside my fireplace?
The Smtyle, Candeldo and Pillar Fireplace Candle Holder listings say they can be used inside a fireplace, and the Candeldo title says so directly. Check the firebox size and the fireplace manual before you place any holder inside a fireplace you use.
Can I use flameless candles?
The Smtyle listing says it suits flameless or dripless candles. The Candeldo names LED pillar candles, the 9-Tier names flameless LED candles, and the Black Pillar says real wax or flameless candles. The Pillar Fireplace Candle Holder text is cut off before it says.
What candle size fits?
The Candeldo holds pillars up to 3 inches. The Smtyle, 9-Tier, Pillar set and Black Pillar list platforms, plates or cups of 3.5 inches. Measure your pillar candles against those sizes before you order.
Do they need assembly?
The 9-Tier takes about 10 minutes, the Candeldo screws together, the Black Pillar needs DIY assembly, and the Pillar set has nine parts to assemble. The Smtyle listing does not describe assembly.
Are these heavy enough to stay put?
Stated weights run from 1.5 to 2.3 pounds for four of the five, and the 9-Tier states none. Each listing calls its base stable, but that is the maker’s wording, so check the listing and the manual.
How far can a candle sit from the heat?
Follow the candle maker’s directions and your fireplace manual. If you are unsure about clearance, ask a professional before you light anything.
Closing note
For a nine-candle centerpiece, the Smtyle, Candeldo and 9-Tier are the closest matches, and the choice comes down to candle width and mantel length. The Pillar set suits a stepped look, and the Black Pillar suits a smaller space. Measure your mantel and your candles before you order, and treat every conflicting figure in a listing as unconfirmed.
